140 Search result(s)
| Manufacturer | Model/Type | YoM | Activity | ahv in m/s² | time to action value in min | Time to limit value in min | Details |
|---|
X
Legend
You may easily identify the exposure level in relation to the exposure limit value due to the colored marking.
Green field: the limit value will be achieved only after an exposure time of 8 hours or longer
Yellow field: the limit value will be achieved for an exposure time of 2-8 hours
Red field: the limit value will be achieved for an exposure time below 2 hours
Last change: 20.02.2019
HAV Immission Values derived from Emission Values
KarLA offers here the calculated immission values obtained by multiplying the emission value out of measurements according to the standards for testing with a correction factor (see Annex 1 of the TRLV Vibration, Part 1). This correction factor was determined for a typical use of the machine.
You can better select the machine using the option fields and select the ranking of the result by clicking on one of the triangles in the head of the columns. If you are clicking on the Details button you will see all information available about the measurement and the machine.
If you are marking a machine in the first column you will see the average of the frequency weighted RMS values of the vibration acceleration for the selected machines below the table.
In each case, only those machine groups and categories are listed, for which datasets are available. Different acceleration values can occur for a machine due to different operating conditions (see detailed view).
Immission Values derived from Emission Values
Loading all dates may take some minutes
Average value of selected Machines:
Catalogue of representative noise and vibration data at work
State Office for Occupational Safety, Consumer Protection and Health
